Derringer II valet mode?

Home / the12volt's Install Bay / Car Security and Convenience / Derringer II valet mode? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

yoda888

Member - Posts: 15

Joined: January 08, 2004

Location: United States

Posted: January 23, 2004 at 2:46 PM / IP Logged

Hey, all. It apparently seems like I don't need a new alarm. Seems the Derringer had some loose wires. Some jingling of the wires and it seems to "work" fine now. Sort of at least!

Anyhow, it's in valet mode right now. Anyone know how to get it into "regular" mode? I found the button, but it just seems to stay in valet mode.

ANy help would be great!

Thanks

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 23, 2004 at 3:01 PM / IP Logged

typically you can turn thr ignition on and then hold the button for 5 seconds. If there is an LED, the LED will be on constantly in Valet mode (typically) and then it should go off after holding the button down for about 5 seconds. You need to press the button within about 5 to 10 seconds of turning thr ignition on.

J Rilla

Owner/Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Derringer II valet mode?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.