IPP03 Bypass and Passlock 1

Home / the12volt's Install Bay / Car Security and Convenience / IPP03 Bypass and Passlock 1 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Memphisman

Copper - Posts: 161

Joined: September 29, 2002

Location: Pennsylvania, United States

Posted: January 24, 2004 at 6:31 PM / IP Logged

Has anyone had problems using the IPP03 bypass module on PASSLOCK 1 equipped cars? I tried using them on 2 different Cavaliers with no success. On the last two Sunfires that I did, I used Omega's DB-PL2002 and they worked flawlessly.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 25, 2004 at 1:07 AM / IP Logged

Most problems with non functioning IPPME ( or IPP03 modules ) is not having the proper bulb test wire. There are usually 3 BLACK wires in the ignition harness and you have to get the right one.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: January 25, 2004 at 1:31 AM / IP Logged

Actually most problems with the IPP03 are that they are JUNK. Complete trash send them back. Passlock 1, passlock 2, it doesn't matter they are junk. IPPME on the other hand is still one of my favorites.

Mike

Memphisman

Copper - Posts: 161

Joined: September 29, 2002

Location: Pennsylvania, United States

Posted: January 25, 2004 at 2:47 PM / IP Logged

I know it's not the test bulb wire because I just replaced the IPP03 with an Omega DB-PL2002 and used the same black wire for the test bulb and it worked flawlessly. I tried one of the IPP03 units that didn't work on the Cavys on a 1998 Lumina (VATS) and it worked like it should.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: January 25, 2004 at 2:52 PM / IP Logged

NowYaKnow wrote:

Actually most problems with the IPP03 are that they are JUNK. Complete trash send them back.

Mike

LMFAO... Mike you crack me up ! IPP03 Bypass and Passlock 1 -- posted image.

Regards

EVIL Teken . . .

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: January 27, 2004 at 5:52 AM / IP Logged

Teken wrote:

LMFAO... Mike you crack me up

LOL glad to hear it! IPP03 Bypass and Passlock 1 -- posted image.

I guess along with trashing a product I should offer some explanation to that opinion so hear it goes..

I'd say about 20% of the time the IPP03 will work and function the way it's supposed to.

40% of the time it will put a vehicle directly into long tamper mode. The worst part is it's not doing it when you try to activate the bypass. Attempting to start the car with the key after installation of the bypass goes right into long tamper mode. First bypass I have seen do this.

The other 40% of the time the bypass will start the car with the remote start, but the security light will stay on. Usually meaning the resistance is close, but a little more off than the car wants. Also this eventually puts the car into long tamper mode as well if you leave the car run long enough.

As you can tell I don't give this bypass a chance anymore and all the stock we had left is being sent back. What a waste of time..

Mike

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

IPP03 Bypass and Passlock 1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.