Valet switch problem

Home / the12volt's Install Bay / Car Security and Convenience / Valet switch problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

stevebvo

Member - Posts: 8

Joined: March 01, 2003

Location: United States

Posted: February 11, 2004 at 3:42 PM / IP Logged

My valet switch is not responding, I tested the switch itself and it's good. I need this switch to program diffrent features. It will not overide the alarm either. The alarm is a Cammando 5005 installed in an 97 f150. If its the unit itself is there any other way to program the features. Thanks

stevebvo

Dreadlock

Copper - Posts: 55

Joined: November 22, 2002

Location: United States

Posted: February 11, 2004 at 5:13 PM / IP Logged

i dont know about that particular alarm , but make sure ignition and door trigger are hooked up. cause you know on dei if they are not it wont program.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Valet switch problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.