00 Impala remote start

Home / the12volt's Install Bay / Car Security and Convenience / 00 Impala remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

buzychristian

Member - Posts: 7

Joined: February 11, 2004

Location: United States

Posted: February 13, 2004 at 4:45 PM / IP Logged

Hi, I have a RS1050 remote start add-on and the problem is that it won't try to start. i have checked the trigger wire on unit (BROWN / yellow) and on car (blue/white), checked the 2nd ign wire on unit (pink/white) and on car (dark green), and have grounded the brake wire (green). The LED is flashing erratic, one flash, maybe ten after that or a singal flash and five after that...the LED is dim, cannot hardly see it. Is there anything else I need to buy to get this to work?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 13, 2004 at 5:03 PM / IP Logged

What unit are you installing and why would you ground the brake input wire ? This requires a (+) signal and also the 2nd ACC ( BROWN ) wire requires hook up as well, otherwise you will experience a no cranking problem. The starter is a YELLOW wire.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

buzychristian

Member - Posts: 7

Joined: February 11, 2004

Location: United States

Posted: February 13, 2004 at 5:35 PM / IP Logged

Jeff thanks for the reply...well here goes the unit is a stella RS1050...the blue/white wire form unit is connect to the white wire on the brake switch. The pink/white from unit is connect to the dark green on the ign switch I must have the wrong info...Do I need to scrap it and start over?...thanks Virgil

tjdurham

Copper - Posts: 180

Joined: July 25, 2003

Location: United States

Posted: February 13, 2004 at 8:46 PM / IP Logged

did you use a bypass as the car has passlock2 you didnt say but that could be the problem

buzychristian

Member - Posts: 7

Joined: February 11, 2004

Location: United States

Posted: February 14, 2004 at 4:01 AM / IP Logged

tj and tim, thanks for giving me a hand....no i didn't have a bypass for passlock, sorry for being an dummy....could you tell me what need to do......

Virgil

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 14, 2004 at 9:28 AM / IP Logged

Use the PLDATA bypass module for the Passlock bypass on this car.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

00 Impala remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.