Cruddy Autoloc schematics!

Hey folks, First post here, but have been browsing the forums for some time. I just purchased some autoloc components for a custom install of power windows, and remote locks for my 63 Chevy II. I do avionics for the military, and wiring is a snap, but these autoloc schematics really blow! Nothing is labeled for signals or polarity, and they want you to just wire it up. Unfortunetly, this wont work for me, and I have alot of other stuff that needs to be tied in. So, does anyone have any decent schematics for the KL600 remote entry system, or autoloc 5 wire actuators, and possibly for their illuminated window switches? Any help would be appreciated! Jack

the 5 wire sounds like a central door lock system....as far as the switches for the windows, what are you looking for???? have you tried spal's site?? they have a tech number there they might be able to help..Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

David, I already have the switches, and yes, the actuators are part of the CK2000 central locking system with the KL600 remote entry unit. I already tried the tech line, they emailed me the same schematic that came with the system, and it is pretty useless! Jack

ok. what is it that you are having problems with??Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

I need a schematic with signals and polarity for the central locking system "brain" and the actuators. The KL600 schematic is pretty well defined. I need to be able to test the actuators without the "brain" hooked up. Also, I have a green wire comming off the main module that is not even listed on the schematic. Jack