accessories

Home / the12volt's Install Bay / Car Security and Convenience / accessories (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jugga-nemo

Copper - Posts: 81

Joined: February 19, 2004

Location: United States

Posted: March 11, 2004 at 1:38 PM / IP Logged

I have a panther 2-way pager alarm on my car and was looking to add the motion /perimeter sonsor and window roll-up modules (and down when de-armed). I was curious how to go about dowing this? My guess is to tap the motion sensor into the shock sensor, but then where do I splice the window modules in? I know this is probably a stupid question, but please bear with me as I am new to this stuff.

5.25" Components & 5x7 Coax Kappas w/Power Acoustik OV4-800

KAC 7252 powering 2 D3 8" Diamonds

KDC-MP728, KGC-4042A

markcars

Silver - Posts: 662

Joined: December 11, 2002

Location: New York, United States

Posted: March 11, 2004 at 2:29 PM / IP Logged

as far as your sensor is concerned, you can do that easily if it has the proper polarity trigger. about the window modules, I don't know what you want, are you trying to connect them to the alarm too?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 11, 2004 at 2:29 PM / IP Logged

Installing Perimeter Sensor & Dual Impact Sensor Using Only One Set of Inputs

For the windows, you might not want to have the windows go down every time you disarm the vehicle. Just think of this, you quickly lock the car and you forget to get something from the back seat and when you unlock/disarm the car all the windows roll down. What you can do is put this function of an AUX channel and use the (-) when armed for the roll up option.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

jugga-nemo

Copper - Posts: 81

Joined: February 19, 2004

Location: United States

Posted: March 11, 2004 at 2:58 PM / IP Logged

Thank you for the diagram, and I'm assuming that the little black boxes on the blue and green wires are diodes. Correct? What would I program the alarm AUX output to (pulsed, timed, or latched)?

Last question: How would I go about wiring in a second siren? I was thinking about placing it in the back of the hatch. The alarm has an AUX for the horn.

5.25" Components & 5x7 Coax Kappas w/Power Acoustik OV4-800

KAC 7252 powering 2 D3 8" Diamonds

KDC-MP728, KGC-4042A

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 11, 2004 at 11:36 PM / IP Logged

Yes, they are diodes ( 1N4001 1 amp diodes ). If you are using an AUX channel for the window module, see what the modules requires. Some require a constant while other's a pulsed. If you want to wire in two or more wires, use this diagram if it's a (+) output from alarm

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

jugga-nemo

Copper - Posts: 81

Joined: February 19, 2004

Location: United States

Posted: March 12, 2004 at 9:45 AM / IP Logged

Thank you very much. That works perfectly! accessories -- posted image.

5.25" Components & 5x7 Coax Kappas w/Power Acoustik OV4-800

KAC 7252 powering 2 D3 8" Diamonds

KDC-MP728, KGC-4042A

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

accessories

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.