1998 Chrysler Concorde alarm

Home / the12volt's Install Bay / Car Security and Convenience / 1998 Chrysler Concorde alarm (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

leon tellis

Member - Posts: 12

Joined: March 12, 2004

Location: United States

Posted: March 12, 2004 at 12:25 AM / IP Logged

whats is the best way to wire a alarm system in a1998 chrysler concorde. This is actualy my first alarm system instalation HELP. Need a wiring diagram and instructions for instalation.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 12, 2004 at 12:37 AM / IP Logged

Check the SEARCH function of this forum for this vehicle and also you can look into the wiring diagrams available for this vehicle here: https://www.the12volt.com/info/diagrams.asp

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

leon tellis

Member - Posts: 12

Joined: March 12, 2004

Location: United States

Posted: March 12, 2004 at 1:08 AM / IP Logged

I am installing a alarm and on the vehicle diagram it says that some of the wires (on location of wires) is BCM. What does this mean?

Mad Scientists

Silver - Posts: 380

Joined: February 07, 2004

Location: United States

Posted: March 12, 2004 at 5:35 AM / IP Logged

If it's a Mopar product it would mean Body Control Module.. Listing year, make and model of vehicle, as well as alarm being installed would always be helpful.

Regards,

Jim

Search for other posts by Mad Scientists

leon tellis

Member - Posts: 12

Joined: March 12, 2004

Location: United States

Posted: March 15, 2004 at 4:51 PM / IP Logged

I am installing a carbine plus 3000 on a 1998 chrysler concorde. Can anyone tell me where the BCM for the power door locks is. I found the color wires that they operate the power door locks behind the drivers side kick panels, is this the right place for installation? Please help.

Leon Jr. Tellis

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 15, 2004 at 5:23 PM / IP Logged

Make: Chrysler

Model: Concorde

Year: 1998

This Database Was Last Updated On: 6/9/2003

Index #: 5037

Alarm

Constant 12 volts RED & PINK/BLACK IGNITION SWITCH HARNESS

Ignition 12 volts D BLUE/WHITE IGNITION SWITCH HARNESS

Starter YELLOW IGNITION SWITCH HARNESS

Dome Light YELLOW (-) AT BODY CONTROL MODULE *

Trunk Pin Switch TAN/BLACK (-) BLACK 22 PIN CONN. IN DR. KICK PANEL

Parking Lamp BLACK / YELLOW (+) 13 PIN GRAY CONN. AT FUSE BLOCK

Power Lock WHITE/ D GREEN 22 PIN CONNECTOR IN #217

Power Unlock SINGLE WIRE SYSTEM DRIVER KICK PANEL **

* Body Control Module Is Located At Junction Block Behind Driver Dash. ** WHITE/ D GREEN Door Lock Wire Must Receive A 12V (+) Pulse Thru A 2.7K Ohm Resistor To Lock And A 12V (+) Pulse Thru A 620 Ohm Resistor To Unlock. #217 - See Single Wire Resistor Door Lock Diagram.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

leon tellis

Member - Posts: 12

Joined: March 12, 2004

Location: United States

Posted: March 15, 2004 at 9:43 PM / IP Logged

Thanks for the info.

Leon Jr. Tellis

leon tellis

Member - Posts: 12

Joined: March 12, 2004

Location: United States

Posted: March 15, 2004 at 9:54 PM / IP Logged

I am intalling a carbine plus 3000 on a 1998 Chrysler Concorde. I am having trouble connecting the wires, please help.

I have some info, please help with the rest...

ALARM CAR

Red (constant) pink/black (ignition harness)

Yellow (switched) blue/white (ignition harness)

pink (parking lights relay input) ???

RED / White (Parking lights relay output) ???

Violet (Positive door pin trigger input) ???

Green (Negative door pin trigger input) ???

Blue (Negative Aux trigger input ???

3 Wire power door lock harness ???

Leon Jr. Tellis

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 15, 2004 at 10:43 PM / IP Logged

ALARM CAR

Red (constant) pink/black (ignition harness)

Yellow (switched) blue/white (ignition harness)

pink (parking lights relay put) i believe this will go to 12 volts

RED / White (Parking lights relay output) Parking Lamp BLACK / YELLOW (+) 13 PIN GRAY CONN. AT FUSE BLOCK ???

Violet (Positive door pin trigger input) you will not use

Green (Negative door pin trigger input) Dome Light YELLOW (-) AT BODY CONTROL MODULE *

Blue (Negative Aux trigger input ???

3 Wire power door lock harness ???

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 15, 2004 at 10:56 PM / IP Logged

post a link for the install manual

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.