Envoy XUV - Adding alarm accessories

I am planning on adding a proximity radar, glassbreak, and pager to my XUV.

I don't really want a full fledged alarm as I dont want starting, siren, etc.

The built-in security system covers most of my needs, all I need to know is if there is a wire that tells me when its armed.

The pager that I am considering is the DEI 795T.  I figure on connecting the glassbreak to one of its zones and the radar to the remaining two (inside, outside).  All I need is a way to turn this pager on and off based on the vehicles built-in security.

Thanks in advance.

I think auex is right because there wont be any type of  wire that will tell you when its armed. Not directly anyway. The definite way to go is an upper end security system. They not only act as a security measure but sometimes add alot of features you may not be able to get on your vehicle from the factory (headlight automation, delayed accessory turn off and much more) Go for the alarm

Out of curiosity, what is your situation that makes you want the pager system?

Mike

The vehicles built-in security already controls lights, locks, horn, etc to my satisfaction. 

I have read the specs to the highest end alarms and the only things they add is pager, remote start, shock/motion/radar.  I do not want remote start though I realize that I do not have to wire it in.

The problem with using one of these full sets is that it controls its own arm/disarm state which I will not accept, I want it slaved to the built-in security, no ifs ands or butts.  I did not come to this forum to listen to sales pitches.

And I have no interest in cutting into dozens of wires to add a box that will give me only a little more functionality.

My originally stated plan would require only a few wire taps, and all I am asking here is a straight answer as to which ones would do the trick.  Please stay on topic.

Again, what wire(s) best tell me when the factory security is armed or not?