keypad removal

Home / the12volt's Install Bay / Car Security and Convenience / keypad removal (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

scrib2s

Member - Posts: 1

Joined: May 22, 2004

Location: United States

Posted: May 22, 2004 at 10:46 PM / IP Logged

to start my truck, 1990 toyota pickup, i have to type in a code on a keypad before it will turn over, i want to remove it but dont kno how, when i lloked at it the keypad connects to a small black box, and out of the box there is several wires that come out and go to ignition and other places. i was told that the it interupts the wire from the ignition to the soleniod im not sure what im have to do to find and connect the wires to get rid of the keypad. any advise to help me figure out how this works or just simply what i need to do to remove it will be appreciated.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 22, 2004 at 10:54 PM / IP Logged

you should be able to trace the wires from the unit to the connection point....if you find any wires that were cut in two, reconnect them and that should take care of everything...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

keypad removal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.