DEI 6500esp wiring w/out remote start

Home / the12volt's Install Bay / Car Security and Convenience / DEI 6500esp wiring w/out remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

boosted-fc3s

Member - Posts: 8

Joined: August 11, 2003

Posted: May 24, 2004 at 10:26 PM / IP Logged

I'm wiring a dei 6500 remote star alarm in a manual car, but I don't want to hook up or use the remote start. Is it ok to use the yellow wire of the 5pin remote start ribon harness labeled (+) ignition input to alarm, zone 5 so the brain knows when the car has been started so it can clear the last trigger codes and enter the learn routine? Thanks.

boosted-fc3s

Member - Posts: 8

Joined: August 11, 2003

Posted: May 24, 2004 at 10:28 PM / IP Logged

Forgot to mention, it will be hooked up to a +12v switched wire, will that work?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI 6500esp wiring w/out remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.