Chirp volume on Python 881XP

Home / the12volt's Install Bay / Car Security and Convenience / Chirp volume on Python 881XP (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ket777

Member - Posts: 4

Joined: June 17, 2004

Location: United States

Posted: June 27, 2004 at 8:55 AM / IP Logged

Hello everybody,

I just installed Python 881XP, and owner's manual says that chirp volume can be programmed to be either full volume or 6db quieter than the full alarm. But I cannot find anywhere how to do that?

Anybody know?

Thanks a lot, ket777

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: June 27, 2004 at 12:04 PM / IP Logged

There is a black loop on the siren, if you cut the loop it will chirp louder.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: June 27, 2004 at 12:06 PM / IP Logged

Not sure about that model but they usally already come with the chirps 6db lower. The instruction are on the box for the siren.

ket777

Member - Posts: 4

Joined: June 17, 2004

Location: United States

Posted: June 28, 2004 at 7:39 PM / IP Logged

Thank you, guys! I've cut the wire - chirps much louder. I guess I trashed the siren box too early...

I have another question though - manual says that I can eliminate any of the six different tones of the siren - resulting in only one.

Instructions on how to do that were also on the siren box? Because I cannot find them anywhere else...

Thanks again for your help!

ket777

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: June 28, 2004 at 9:45 PM / IP Logged

to eliminate your tones you are going to have to open up your siren. on the circuit board there are six numbers each number represents a tone. for example tone number one is identified with a number 1, the second tone is marked as number 2 and so on. if you like tone number one you simply cut the electrical passages to tones 2,3,4,5,and6. i used an exacto knife for this procedure. if you like the third tone, simply cut 1,2,4,5,6. if you have more questions regarding the procedure let me know.

gcorrea

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Chirp volume on Python 881XP

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.