alarm for 1998 Malibu

Home / the12volt's Install Bay / Car Security and Convenience / alarm for 1998 Malibu (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

2blk72

Member - Posts: 7

Joined: September 16, 2003

Location: United States

Posted: July 14, 2004 at 11:24 AM / IP Logged

OK i want install an alarm for a Malibu, I have bought 4 diodes and I have also bought 2 relays I think that I need them for the doors I think I might one for the trunk also what else will I need to by to make this project work for me? I also need help on the diodes do I solder them to my door trigger wires? I just really need any help that can be given to me thanks alot. I have a K-9 Mundial-2 alarm.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 14, 2004 at 11:54 AM / IP Logged

The lt. GREEN/ black is located in the drivers kick and catches only the drivers door. The lt. blue is located in the harness coming from the drivers running board going under the drivers seat and it catches all other doors. Use both door trigger wires and diode isolate each. according to the diagram with the band facing the door trigger wires ( away from the alarm brain )

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: July 14, 2004 at 7:52 PM / IP Logged

https://www.the12volt.com/relays/relays.asp

for the trunk release (assuming you already have power trunk pop); #86 & #87 = +12v , #85 = neg. trunk output from alarm, #30 = black wire at the trunk release switch, #87a = not used

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm for 1998 Malibu

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.