Hornet 732T & 451M in 98 Dodge Ram

Home / the12volt's Install Bay / Car Security and Convenience / Hornet 732T & 451M in 98 Dodge Ram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cspot

Member - Posts: 4

Joined: July 18, 2004

Posted: July 24, 2004 at 10:44 PM / IP Logged

Considering this setup...main concern is the keyless entry....but I'm expecting the 451M to resolve that.

Any words of wisdom on this setup, or install issues I could come across, please pass them on.

Chuck

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: July 24, 2004 at 11:01 PM / IP Logged

No problems what so ever with this install, real simple in fact. Also if the vehicle came with remote keyless entry as an original option then you won't even need the 451M. If it did then the locks are a postive trigger system, if they didn't then they are reverse polarity and you will need the 451M.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Hornet 732T & 451M in 98 Dodge Ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.