the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Plymouth voyager black box?


Post ReplyPost New Topic
< Prev Topic Next Topic >
UNowned 
Member - Posts: 4
Member spacespace
Joined: August 02, 2004
Location: United States
Posted: August 13, 2004 at 3:06 PM / IP Logged  
hey everybody, im trying to take off that annoying keychaiun sensor for this van, and the wires led to this black box that says " TRS AR, INC" it seems to be tapping into a bunch of wires under the steering coloum so i think thats it. anyways my question is will anything fry if i take that box out? and will it work like normal afterwards?
tbirdman74 
Copper - Posts: 164
Copper spacespace
Joined: August 22, 2003
Location: United States
Posted: August 14, 2004 at 3:01 AM / IP Logged  
Do a little research and find out which wires it is connected to, and that will tell you much of what you need to know.  It sounds like it is an ignition disabler, with a keychain transponder.  Do you have to pass the keychain close by a sensor, then only have 30 or so seconds to start the vehicle?  And after that 30 seconds does nothing happen when you turn the key?  If so then thats what it is, and the good members of this site can, and usually will, help you to remove it.  I know they have always been helpful to me when I had a problem.  Good Luck!
If it don't fit, Force it.
If it breaks, You needed a new one anyway!
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: August 14, 2004 at 9:26 AM / IP Logged  
Try to find the FCC ID# at bare minimum. If it is just an alarm then all you would have to do is pull the connection or cut the connection at the point the alarm tied into a vehicle wire. Then reconnect the starter wire under the dash.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
UNowned 
Member - Posts: 4
Member spacespace
Joined: August 02, 2004
Location: United States
Posted: August 14, 2004 at 2:08 PM / IP Logged  
thanks for all the help guys, i did it, all the connections where easy to locate and remove, easy as pie! thanks again!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer