add aux output to alarm?

Home / the12volt's Install Bay / Car Security and Convenience / add aux output to alarm? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bkelley

Member - Posts: 5

Joined: August 28, 2004

Location: United States

Posted: August 29, 2004 at 7:45 PM / IP Logged

Hey guys I was wondering something.

Is there a way I can add aux output to my car alarm?

Or is there a way I can make one output do two different things? For example have it when I hit the button once it will unlock one door but if I hit it again it will unlock another door. I know some alarms will do this but mine does not. Is there a way I cand add this to mine or a aux output?

I have a magicar FAI-300 alarm

bkelley

Member - Posts: 5

Joined: August 28, 2004

Location: United States

Posted: August 29, 2004 at 9:48 PM / IP Logged

I have installed it on a 97 f150. I have shaved door handels so driver door is on the unlock button and the pass. door on the trunk release. But I want o be able to use the trunk release for my tail gate. So is there a way to add a aux output to open other door, or make the unlock button be able to open both doors(one at a time)? The alarm has a built in central door lock module.

bkelley

Member - Posts: 5

Joined: August 28, 2004

Location: United States

Posted: August 31, 2004 at 7:04 PM / IP Logged

bump

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 31, 2004 at 8:35 PM / IP Logged

Buy an alarm that has more programable options including progressive locks to control the doors. There is nothing you can do that will allow you to unlock the second door with the unlock button if it is not programable through the alarm.

I HATE PEOPLE WHO "BUMP"!!!

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: September 01, 2004 at 4:46 PM / IP Logged

You could use the relay wiring guide listed in this site to do the very basic of what your asking.

But, you will have to use a toggle switch to *enable / select* that feature each time, or turn it off.

Regards

EVIL Teken . . . .

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

add aux output to alarm?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.