2000 elantra remote/starter

Home / the12volt's Install Bay / Car Security and Convenience / 2000 elantra remote/starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jasgal

Member - Posts: 8

Joined: March 10, 2002

Location: United States

Posted: March 13, 2002 at 8:37 PM / IP Logged

i BOUGHT A REMOTE STARTER AND AN ACTUATOR FOR THE CENTRAL LOCKING SYSTEM. Is any body familiar w/ these cars.......i posted earlier about the degree of difficulty im getting into. but can i take the casing from aroung the steering wheel off with ease to get to these wires around the ignition. i am going to attemp to install this on my 200 elantra this weekend....just want to know what i am getting my self into....thanks for any help...

jasgal

Member - Posts: 8

Joined: March 10, 2002

Location: United States

Posted: March 13, 2002 at 8:39 PM / IP Logged

also......didn't mention...i am installing the who remote starter ...not just the actuator.....and i also want to have the lights flah when the starter activates.....this is an option...where do i ti into the parking light.....is this near the steering column.....?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 13, 2002 at 11:00 PM / IP Logged

This is a very straight forward installation. Go here for the wire codes :http://www.bulldogsecurity.com/wires/hyunelan99-01.htm and the parking lights you just have to splice the parking light wire from the remote starter to the GREEN / WHITE wire coming off the driver kick panel or the light switch. test to make sure that this is in fact the wire.

Most of the wires you will find if you remove the panel under the steering column by your knee and once you have all the wires in sight, test to verify that the wire is infact the wire that you wish to splice into ( use solder ) and then test the unit.Good luck and if you need more help with this just post your concerns and we'll be more than happy to help you out.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 elantra remote/starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.