the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dead plainview clifford valet switch?


Post ReplyPost New Topic
< Prev Topic Next Topic >
tastyratz 
Member - Posts: 9
Member spacespace
Joined: August 29, 2004
Location: United States
Posted: September 14, 2004 at 10:39 PM / IP Logged  
ok so When attempting to spend some more time programming my avantguarde g4 on my nissan 240sx i noticed that my plainview valet switch buttons arent doing anything! good thing i dont have blackjax turned on... they worked as far as i know the whole time ive had the alarm and i thought they have always worked fine until today since ive used them before. troubleshooting says "Verify the WHITE wire rests at +5V, shows +3V when pressing the switch’s * button and 0V when pressing the blank button" so when I hooked up a multimeter i got 0v at rest and .07v when pressing the * button and 0v when pressing the blank button... ground wire looked ok and I checked the connections on this + the actual multimeter connection and everything is fine. the only change ive made is soldering in the tach wire which i doubt would cause any of this.

button.

its_radio_shop 
Copper - Posts: 76
Copper spacespace
Joined: March 16, 2004
Location: United States
Posted: September 15, 2004 at 9:54 AM / IP Logged  

The easiest thing to do if you have a Clifford dealer near you, is to go in and see if they will hook your alarm up to a PC and see what functions are working. If it shows your valet is the only thing not working they should have a spare you could plug into to see if that fixes it. I have run a AG4 for several years and have installed several too. Its not unheard of for those valet switches to have a problem, although its not real common. Let me know what you find out. Good luck.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer