the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 Jeep Viper 791


Post ReplyPost New Topic
< Prev Topic Next Topic >
Autosexual 
Member - Posts: 47
Member spacespace
Joined: January 31, 2004
Location: United States
Posted: September 25, 2004 at 9:05 PM / IP Logged  
I am installing the Viper 791 alarm with the DEI 55C bypass module in a 99 Jeep Grand Cherokee, but I am not sure which wire the blue wire from the 555C to connects to with the 791.  The directions say to connect it to the (-) through activation output of the remote start system, but which wire is that?

hagmanti 
Silver - Posts: 304
Silver spacespace
Joined: September 14, 2004
Location: United States
Posted: September 25, 2004 at 10:29 PM / IP Logged  
The blue wire on the remote start primary harness.
Me
gus1 
Gold - Posts: 1,013
Gold spacespace
Joined: October 15, 2003
Location: Canada
Posted: October 02, 2004 at 3:35 PM / IP Logged  
On the XRCS (relay satellite thing) there is a 4 wire plug next to the ribbon satellite harness. This 4 wire plug has a blue, pink, purple, and orange wire in it. The blue wire is the -status/ground when running output that you will need to connect to the blue wire on your 555C.
Gus
Wherever I go, that is where I end up......
Autosexual 
Member - Posts: 47
Member spacespace
Joined: January 31, 2004
Location: United States
Posted: October 03, 2004 at 6:59 PM / IP Logged  

I am trying to find the neutral safety wire in a 99 Jeep Grand Cherokee limited, can someone direct me to it?

For a bonus question, I am putting in a Viper 791 and I am using the DEI interface for the door locks but when I lock the doors I am getting the horn as well as the chirp letting me know that the alarm has been activated.  Does anyone know how to eliminate the horn or tell me what I might of done wrong?

mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: October 03, 2004 at 7:21 PM / IP Logged  

I have:

BROWN / Yellow ( - )at Switch onTransmission or PCM (located on passenger rear of engine compartment)

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
jmr964 
Copper - Posts: 70
Copper spacespace
Joined: September 02, 2004
Location: United States
Posted: October 03, 2004 at 8:33 PM / IP Logged  

Regarding the horn honk go to the overhead console and go through the menu options and turn the horn off.  I have a JGC that doesn't have the factory alarm so I don't know if this will be the same or not but it lets you select if you want the horn to honk when locking and unlocking the doors with the factory keyless entry.  Give that a try and let me know.

Jason

Autosexual 
Member - Posts: 47
Member spacespace
Joined: January 31, 2004
Location: United States
Posted: October 21, 2004 at 9:57 PM / IP Logged  

That was a verry simple solution for the horn honk thanks.

As for the neutral saftey wire I am still  coming up with nothing.  I do not find a BROWN / yellow at the switch.  What else do you have that might get me there.

Autosexual 
Member - Posts: 47
Member spacespace
Joined: January 31, 2004
Location: United States
Posted: October 21, 2004 at 9:59 PM / IP Logged  
Thanks that did the trick.
isus 
Copper - Posts: 71
Copper spacespace
Joined: October 19, 2004
Location: United States
Posted: October 21, 2004 at 10:09 PM / IP Logged  
Just ground the wire.  That will solve the issue.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer