door trigger input

Home / the12volt's Install Bay / Car Security and Convenience / door trigger input (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

W211_ryda

Member - Posts: 5

Joined: August 25, 2004

Location: United States

Posted: September 27, 2004 at 2:48 PM / IP Logged

I was trying to install a Clifford Matrix RSX 1.5 yesterday and noticed that it doesn't have any wire for the door trigger input. Doesn't this feature come standard on all alarms? Is there any way I could wire in a door trigger input for this alarm? If not, I guess I'll have to sell this alarm and get a new alarm.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: September 27, 2004 at 3:56 PM / IP Logged

The RSX 1.5 is not an alarm system, it is a RS unit. If you wish to have the doors kill the vehicle upon entry. Then simply diode isolate the door trigger and tie into the hood input, or similar input. H3/2 gray (-) wire

Regards

W211_ryda

Member - Posts: 5

Joined: August 25, 2004

Location: United States

Posted: September 27, 2004 at 8:59 PM / IP Logged

Thanks for clarifying this for me Teken. Just bought an Avistart 6001 from my friend and I'll be selling the Matrix. The Avistart has all the features I need. This is one expensive lesson. door trigger input -- posted image.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: September 27, 2004 at 9:22 PM / IP Logged

Well, look at this way. It all turned out for the best, and you will have what you really needed.

REMEMBER: It's never a problem, if money can fix it. If money cannot fix the problem, then indeed it is a problem.

Regards

EVIL Teken . . .

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: September 28, 2004 at 11:22 AM / IP Logged

Well put Teken!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door trigger input

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.