Unlock problem

Home / the12volt's Install Bay / Car Security and Convenience / Unlock problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jtjnt

Member - Posts: 2

Joined: July 13, 2004

Posted: October 01, 2004 at 4:09 PM / IP Logged

I had a brand new xv791 installed in my 04 trailblazer. Everthing works fine except the door looks. When we reprogram the 445g for no keyless and plug it in to the module it trys to cycle but it only cycles open twice, no lock. Tried two different 445g's with the same problem. Has this happend to anyone else?

The directions for the 445g state to ground from the GREEN/ black to black to reprogram. Plug in to module and it should cycle. Then attach the GREEN/ black to the green of the security system. Since this last connection has already been done I don't know if the reprogram is complete.

jtjnt

Member - Posts: 2

Joined: July 13, 2004

Posted: October 02, 2004 at 6:19 AM / IP Logged

nobody with any ideas?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Unlock problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.