weird problem with Matrix 3.5 remote

Home / the12volt's Install Bay / Car Security and Convenience / weird problem with Matrix 3.5 remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

supdupa02

Member - Posts: 5

Joined: September 02, 2004

Posted: October 03, 2004 at 1:35 AM / IP Logged

Hows it going? I have a weird problem with one of my remotes. I have two sets of matrix 3.5 remotes.

Using the the first remote works fine. When I press the unlock button, the car's doors unlock. The doors also unlock when i the ignition is turned off. No problem with locking the car.

When using the second remote it does not unlock when I press the unlock button. In order for me to unlock the car's doors i have to quickly press the unlock button twice. When the ignition is turned off, the doors do not unlock like when I am using the first remote. I have no problem with locking the car.

I have tried to reprogram the second remote by removing the battery then putting it back in then using the valet switch to program the remote, but that does not seem to work, unless, I am not programming the remote right (I use the autolearn function to program the remote).

Thanx.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: October 03, 2004 at 1:09 PM / IP Logged

Delete all transmitters (option 12) and relearn all RC and try it again.

Regards

EVIL Teken . . .

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: October 03, 2004 at 1:28 PM / IP Logged

Did you install this unit yourself? If so, try the above method first. If the unit was installed and programmed with a bitwritter, the unit may be locked, or programmed for only one remote.

Regards

EVIL Teken . . .

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

weird problem with Matrix 3.5 remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.