Stoopid Question

Home / the12volt's Install Bay / Car Security and Convenience / Stoopid Question (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

DigitalFusion

Member - Posts: 5

Joined: October 22, 2004

Posted: October 22, 2004 at 9:06 PM / IP Logged

Hey All,

A friend and I are installing a remote start/alarm in his 98 Chev Pickup. The diagram for the alarm goes like this:

RED / Black = To ON

Blue/White = To ACC

Trouble is that the wiring diagram we have goes like:

Ignition = Pink

Ignition2 = White

ignition3 = Brown

Accessory = Orange

We are not sure which wire to wire to which switch position. When we click the key all the way back, we get voltage at brown. When we click to the first position we get voltage to white, and on the third position we get power on everything.

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 22, 2004 at 9:28 PM / IP Logged

If all U have is those 2 wires from RS

The way I see it:

Ignition = Pink = RED / Black = To ON

Ignition2 = White = SPDT RELAY

ignition3 = Brown = Blue/White = To ACC

Accessory = Orange = SPDT RELAY

Don't Learn from Others Mistakes

You Might Be the One That Knows.

DigitalFusion

Member - Posts: 5

Joined: October 22, 2004

Posted: October 22, 2004 at 10:15 PM / IP Logged

thanks... we will give that a try

DigitalFusion

Member - Posts: 5

Joined: October 22, 2004

Posted: October 23, 2004 at 3:56 AM / IP Logged

the remote start is not working, the truck starts, but dies right away... we found this information for the alarm:

Stoopid Question -- posted image.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: October 23, 2004 at 12:06 PM / IP Logged

what unit are you installing??????????????????????/

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

hlude1

Member - Posts: 23

Joined: October 21, 2004

Location: United States

Posted: October 23, 2004 at 2:22 PM / IP Logged

The unit is the magicar 8100

DigitalFusion

Member - Posts: 5

Joined: October 22, 2004

Posted: October 23, 2004 at 2:31 PM / IP Logged

hey tim, did whats-his-name email you yet?

hlude1

Member - Posts: 23

Joined: October 21, 2004

Location: United States

Posted: October 23, 2004 at 2:33 PM / IP Logged

sure did

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: October 24, 2004 at 1:34 PM / IP Logged

did you get everything working???

will the truck start with the key in the ign.???

if it does and will not with they key out, then you need to bypass the pass system....

let us know.....

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: October 24, 2004 at 1:54 PM / IP Logged

I am banking on a problem with the passlock, either the module is defective, not installed properly, or just not installed. Did you use a bypass module?

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.