the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

98 F150 remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
meltingplastic 
Copper - Posts: 225
Copper spacespace
Joined: November 08, 2004
Location: United States
Posted: November 21, 2004 at 12:49 PM / IP Logged  
Hey guys,
Well i'm doing my uncles remote start right now and for some reason the thing just wont remote start.. starts up fine with the key but doesnt do anything once i press the remote start button.   its a viper 160xv system.   i've checked every connection and they meter out the way they are supposed to. Any tips on this one. when i press teh remote start button it does absolutely nothing.. but the relays will click when i lock and unlock and the status light will flash with those but it doesnt do anything for remote start.   help me out asap!
-Mike
Driving a Bagged, Caddied 02 s10
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: November 21, 2004 at 1:18 PM / IP Logged  
Do you need to program the tach? I am not familiar with DEI much, but most units require the tach to be programmed.
J Rilla
Owner/Installer
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: November 21, 2004 at 1:33 PM / IP Logged  
do you have all of the safety wires hooked up right???
are you using the hood pin switch?????
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: November 21, 2004 at 1:39 PM / IP Logged  

when u press the Start  button does it try to start? is it program for 3 pushes? the default is two?

some of does trucks have Pats keys (transponders)

Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
meltingplastic 
Copper - Posts: 225
Copper spacespace
Joined: November 08, 2004
Location: United States
Posted: November 21, 2004 at 2:11 PM / IP Logged  
ok well it turned out that the ground swtich thing was broken.. just plain out grounded it and it would try to start... cranked but just died.. even with the key int he ignition so its no that theres achip... the unit kept freaking out like tuning on and off as if the power and ground connection for the unit kept coming undone.. pulled the connetions from the plug attacahed them directly to the unit to their spot and the unit is still all messing up... think the units messed up?
Driving a Bagged, Caddied 02 s10
meltingplastic 
Copper - Posts: 225
Copper spacespace
Joined: November 08, 2004
Location: United States
Posted: November 21, 2004 at 2:15 PM / IP Logged  
i have yet to hook up the tach wire.. most likely would that be why? the person who taught me how to install these said dont worry about the tach he asnt installed one in 2 y ears
Driving a Bagged, Caddied 02 s10
Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: November 21, 2004 at 2:17 PM / IP Logged  
well if u didn't use the tach wire you will have to program the unit for voltage sense. also make sure the ignitions wires are not backwards with ACC
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
meltingplastic 
Copper - Posts: 225
Copper spacespace
Joined: November 08, 2004
Location: United States
Posted: November 21, 2004 at 2:30 PM / IP Logged  
thank you soo much.. i didn tknow about hte voltage sense thing...   i shall be donating to the12volt tomorrow because u guys are honestly the greatest resources out there!!
Driving a Bagged, Caddied 02 s10
Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: November 21, 2004 at 2:47 PM / IP Logged  

no problem hope it works

98 F150 remote start -- posted image.

Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
meltingplastic 
Copper - Posts: 225
Copper spacespace
Joined: November 08, 2004
Location: United States
Posted: November 21, 2004 at 5:25 PM / IP Logged  
thanks alot guys.. remote start works like a charm too bad the locks dont... got too dark and i couldnt find the disaem wire in the kick panel... any help with that one? or the rearm in the RAP(no idea what this looks like)
Driving a Bagged, Caddied 02 s10

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, July 18, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer