OEM alarm in 99 Acura TL

I have installed a Crimestopper CS-2011RS series IV alarm/remote start/keyless entry into a 99 TL 3.2. The problem I'm running into is how to disable the factory alarm during remote starts. As it stands if I remote start the factory alarm goes off. to get around this I'm simply sending a disable/unlock prior to starting, this isn't ideal. The Crimestopper does have an OEM alarm disable option - but - The only way I can see to disable the factory alarm is with a door unlock. The problem here is that the Crimestopper alarm sees the unlock as a breakin (it is still monitoring the doors just before the remote start.) So either way I have to send a disable/unlock before starting or one of the alarms will sound on a remote start. Any ideas on how I can remote start with just 1 button?cls

I looked for that but the closest programming option they had was lock during/after remote start.cls

I see from an old post that there is a 'Disarm No Unlock' (blue) wire at the drivers door key cylinder. This isn't on my directwire chart. Can anyone verify this? Thankscls

yes this is correct my information says the same...I never went to it, cause of all the work involved...i just made it unlock before start, but if you can't do that on that system. This is the only way for youTesting is the key

Thanks Slicksam; Does that wire come back into the drivers side fuse panel or is it just located at the cyliner? Thanks again.cls

slicksam wrote: cylinder....there are 2 plugs at the ignition barrel, 1 is black and the other is white. it is the only black thin wire in that white plug disregard this info....wrong post

Testing is the key