boa 165b remote starter

{TABLE cellPadding=0 cellSpacing=0 height="100%" id=HB_Mail_Container width="100%" UNABLE="on"}{TR height="100%" UNABLE="on" width="100%"}{TD background=""0 id=HB_Focus_Element vAlign=top width="100%" UNABLE="off"} Trying to install boa remote starter on a1996 ford ranger. I called boa but no one is there on sunday. I need to get the correct wiring diagram. I think I got it all hooked up but nothing happens. I have tried to unplug all the wires and still nothing. Do I need a 2nd ignition wire for this? The lights will not flash when trying to program.{/TD}{/TR}{TR UNABLE="on" hb_tag="1"}{TD height=1 style="FONT-SIZE: 1pt" UNABLE="on"}{DIV id=hotbar_promo}{/DIV}{/TD}{/TR}{/TABLE}

Constant 12 volts	YELLOW (4)	IGNITION SWITCH HARNESS
Ignition 12 volts	L GREEN/ PURPLE	IGNITION SWITCH HARNESS
Starter	RED / L BLUE	IGNITION SWITCH HARNESS
Dome Light	BLACK/ L BLUE (+)	84 PIN SQUARE CONN. BEHIND DR. DASH
Trunk Pin Switch	N/A
Parking Lamp	BROWN (+)	AT HEADLIGHT SWITCH (W/O OEM ALARM) *
Power Lock	PINK / YELLOW	16 PIN CONNECTOR IN
Power Unlock	PINK/L GREEN	DRIVER KICK PANEL

* With OEM Alarm Parking Lights Are WHITE/ BLACK (+) At Headlight Switch.  Negative Pulse Door Locks

Accessories
Window Up	D\ WHITE/ BLACK P\ WHITE/ YELLOW @ MAIN SWITCH
Window Down	R/ RED * S/ TAN/L BLUE
Ign Key Warn	BLACK/ PINK (-)	IGNITION SWITCH HARNESS
Trunk Release	N/A
OEM Horn	YELLOW/L GREEN (-)	STEERING COLUMN HARNESS
Headlights	RED / YELLOW (+)	AT HEADLIGHT SWITCH
OEM Alarm Arm	N/A
OEM Alarm Disarm	D GREEN/ PURPLE (-)	DRIVER KICK PANEL

Reversal Rest At Ground Power Window Circuit Diagram. * RED Wire For Driver Window Down Must Be Accessed At Motor In Driver Door. Color At Switch In Door Is TAN/L BLUE.

Remote Start
Tach Signal	TAN / YELLOW	AT POWERTRAIN CONTROL MODULE *
Ignition #2	GRAY / YELLOW	IGNITION SWITCH HARNESS **
Ignition #3	GRAY / YELLOW	IGNITION SWITCH HARNESS **
Accessory	BLACK/ L GREEN	IGNITION SWITCH HARNESS
Neutral Safety	NOT GROUNDING TYPE -	OEM SWITCH OPENS STARTER CIRCUIT
Brake Light	L GREEN (+)	AT SWITCH ABOVE BRAKE PEDAL BRACKET
Reverse Light	BLACK/ PINK (+)	AT SWITCH ON TRANSMISSION
Rear Window Defrost	N/A

* Powertrain Control Module Located On Passenger Rear Of Engine Compartment On Firewall. TAN / YELLOW Wire Also Located In Round Single Pin Tach Test Connector On Driver Rear Of Engine Compartment. ** Both GRAY / YELLOW Wires Must Be Powered For Heat/Ac To Operate.MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.