Remote start stopped working!

Home / the12volt's Install Bay / Car Security and Convenience / Remote start stopped working! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

blueblazing

Member - Posts: 4

Joined: January 04, 2005

Posted: January 18, 2005 at 6:34 PM / IP Logged

Hi, I installed a Autostart (AS-1725 SH) remote start in my 91 blazer about 3 months ago, and everything worked perfect, then all of a sudden today when I pressed the remote start start button the parking lights came on and everything but it wouldn't crank to start. I can start my blazer with my key and everything else is working fine on the remote start. What is going on I can't remote start my blazer anymore. HELP

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 18, 2005 at 7:48 PM / IP Logged

This also happened to one of my custonmer's with the Autostart. I just relearned the remote control and everything was working again for her.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

blueblazing

Member - Posts: 4

Joined: January 04, 2005

Posted: January 18, 2005 at 10:44 PM / IP Logged

Velocity Motors wrote:

This also happened to one of my custonmer's with the Autostart. I just relearned the remote control and everything was working again for her.

Okay well I found out that it was a blown fuse from the red power wire, changed the fuse and now it's working fine. My question is WHY did the fuse blow?

vinman75

Copper - Posts: 63

Joined: December 18, 2004

Location: United States

Posted: January 24, 2005 at 1:09 AM / IP Logged

it might not be getting enough current from the wire you are tapped to. either that or check to see if there are any kinks or cuts in wires that may be able to ground out.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: January 24, 2005 at 1:33 AM / IP Logged

you're starter is old. (vehicles starter motor) this a very common occurance with GM trucks.

I usually install a 30amp self reseting breaker ( they plug in place of an ATC fuse)

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

blueblazing

Member - Posts: 4

Joined: January 04, 2005

Posted: January 24, 2005 at 10:11 AM / IP Logged

Thanks for the help guys. Remote start stopped working! -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote start stopped working!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.