Problem with remote

I believe i have the viper equivalent to the clifford matrix RS 3.5, i have the clifford remote that has the lcd but i checked my main alarm unit and it says viper. out of the blue my remote stopped working, it would give the feedback as if it was out of range yet i was sitting right inside the car. i can't seem to find a way and reprogram it, i have my friends install manual for the clifford RS 3.5 but it doesn't seem to work for my alarm. i really need help! thanks

did you mean viper 791xv the blue pager?  that you can do is unplug the antena for 5 sec. and plug it back and try it press lock, lock ,lock, if it did not work you have a bad pager you just have to replacedhow own your mind, control your life.

MECP certified. always use a DMM

in that case you have to reprogran the remote.it should work both are the same.how own your mind, control your life.

MECP certified. always use a DMM

actually its the 690xv, i guess they sold me and installed the wrong alarm wasn't able to distinguish which was the antenna cable

the 690xv use the same antena the antena should be in the winsheld thas the wire you have to unplughow own your mind, control your life.

MECP certified. always use a DMM

Try disconnecting the alarm completely for a minute or so, and try that. Those things happen all the time for some odd reason. I have to do mine like that every so often. ~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

still nothing, i guess i'm gunna try and buy a remote for the time being and try programming it, not going back to the city i got it installed for another month, any other suggestions would be great