Lancer Starting Prob. with Magicar F8100

Home / the12volt's Install Bay / Car Security and Convenience / Lancer Starting Prob. with Magicar F8100 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

santoz4u

Member - Posts: 2

Joined: February 12, 2005

Location: United States

Posted: February 12, 2005 at 11:45 AM / IP Logged

I have a 2002 mitsubishi Lancer and I installed a MAGICAR 2 WAY LCD remote starter/alarm system. The alarm works fine but It does remote start. It would not learn tach. The installar had hard time in programming the remote. All the wiring diagram are followed and checked many times and the installar is professional. Any Idea how to debug it?? I will be thankful for any help.

thanks

skn

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 12, 2005 at 12:49 PM / IP Logged

Where did he get the tach signal from?

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: February 12, 2005 at 2:22 PM / IP Logged

Tach Signal: BLACK / YELLOW or BLACK/ Green---Either ignition coil

two wires to grab from, take it back and tell teh dude to resolve it.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

santoz4u

Member - Posts: 2

Joined: February 12, 2005

Location: United States

Posted: March 16, 2005 at 8:54 PM / IP Logged

Hi Friends,

I have a Mitsubishi Lancer'02 model and I have installed a Magicar FAI 8100 alarm+ remote starter unit. I can't start the car in the first attempt If I press the start button for more than 3 seconds after arming the car. But If I switch off and again press the start button, it starts the car in the second attempt. And after getting in to the car I can't shut down the engine neither pressing the brakes nor taking out the key. I have to press the start button of the alarm unit to shut down the engine. Any help will be really appreciated.

thanks

santosh

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Lancer Starting Prob. with Magicar F8100

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.