Ground when armed output

Home / the12volt's Install Bay / Car Security and Convenience / Ground when armed output (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hiluxrunner

Member - Posts: 5

Joined: October 04, 2002

Location: United States

Posted: November 04, 2002 at 11:52 PM / IP Logged

I have an ungo MS2005 alarm. On the ground when armed output im currently sending a ground signal to 3 window modules and a starter kill relay. The (-) output is rated at 500mA. Do i need to install a relay to supply better ground for all of my modules? If so what wires should go on each post to do so? Thanks!!

Chris

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: November 05, 2002 at 12:59 PM / IP Logged

No you dont want to do that , because your relay will be open all the time drawing current. it would run your battery down much quicker.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ground when armed output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.