the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Disabling Viper Alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
rigmover 
Member - Posts: 2
Member spacespace
Joined: March 27, 2005
Location: United States
Posted: March 27, 2005 at 12:11 PM / IP Logged  
I'm not sure of the model but my Suburban is a '99 model and it had a Viper after-market system installed. Can someone please tell me how to disable it and enable it?
swamprat323 
Gold - Posts: 1,335
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: March 27, 2005 at 1:57 PM / IP Logged  
turn IGN on then off, then press the valet button withn 10 sec.
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: March 27, 2005 at 2:31 PM / IP Logged  
Or depending on how old the alarm is, open door, hit lock, unlock, lock and the alarm should go into Valet.
If all else fails drive it into a lake!!!
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
rigmover 
Member - Posts: 2
Member spacespace
Joined: March 27, 2005
Location: United States
Posted: March 27, 2005 at 5:56 PM / IP Logged  
Thanks for the replies. The lake idea isn't a bad one. It's a 3/4 ton land barge and the gas mileage is killing me. I've considered taping a $100 bill to the windshield, leaving the keys inside the ignition and hoping someone will just drive it away to put me out of my misery. But the $100 will only get them to the next gas station so that won't work. LOL.
xdeliriousx 
Member - Posts: 14
Member spacespace
Joined: February 14, 2005
Location: United States
Posted: March 28, 2005 at 12:57 PM / IP Logged  

swamprat323, that is the answer to my question too... Let me go out and try it and see if it works :)

David

xdeliriousx 
Member - Posts: 14
Member spacespace
Joined: February 14, 2005
Location: United States
Posted: March 28, 2005 at 1:06 PM / IP Logged  

swamprat323, could you give a more detailed instruction on how to do that?  Like leave the door opened or close, how long must the ignition be on?  how long do I hold the velet switch for, etc.... I couldn't get it to work :/

David

swamprat323 
Gold - Posts: 1,335
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: March 28, 2005 at 4:36 PM / IP Logged  
once u turn in on turn it off right away and then press the valet button, All this be doen under 10 sec.
If dont work make sure the valet button is plug in all the way and make sure the IGN is hook up. To see if that is (im sure it is, but never know) that is it not in valet mose now, arm the system and turn the IGN on, if alarm sounds it hook up. remember that is if the system is not in valet mode.
Aslo try it form remote, make sure the door is open though.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer