4001 diode on dodge single pulse doors

Home / the12volt's Install Bay / Car Security and Convenience / 4001 diode on dodge single pulse doors (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kerckhof

Member - Posts: 5

Joined: February 26, 2005

Location: United States

Posted: March 27, 2005 at 4:42 PM / IP Logged

has anybody had to worry about the resistance of the 4001 diodge on a single wire pulse door lock system on a dodge ram pickup when using it between the alarm module and the resistors.

Darrel

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: March 27, 2005 at 4:50 PM / IP Logged

Why would you use a diode for this???

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

kerckhof

Member - Posts: 5

Joined: February 26, 2005

Location: United States

Posted: March 27, 2005 at 4:54 PM / IP Logged

On the designtech 20092 system the two wires that control the unlock/lock pulse the diodes are used to block the power from these wires from going into the dodge wires, but allow the grounding of the dodge wires thro the module to ground.

Darrel

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: March 27, 2005 at 4:58 PM / IP Logged

I still don't understand why you need diodes for this? You are supposed to use relays when integrating into 1 wire lock systems and the relays isolate the alarm from the car.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

kerckhof

Member - Posts: 5

Joined: February 26, 2005

Location: United States

Posted: March 27, 2005 at 5:01 PM / IP Logged

can you give me a diagram has to how to do it to just double check mine is working, because my system isn't working correctly.

Darrel

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: March 28, 2005 at 6:42 PM / IP Logged

Diode is not necessary for your application.

This is the way to do a single wire door lock. Sometime you have to play around with the resistor to get it working correctly.

How to wire up single wire door lock & unlock system

Be careful whose advice you buy, but be patient with those who supply it. 4001 diode on dodge single pulse doors -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

4001 diode on dodge single pulse doors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.