the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

I don't get it!


Post ReplyPost New Topic
< Prev Topic Next Topic >
c0ckeyed00 
Copper - Posts: 61
Copper spacespace
Joined: October 14, 2003
Posted: April 27, 2005 at 3:02 AM / IP Logged  
I tried to wire my dome super for my 02 Ford F250 and I don't get the wiring. I found the wire that leads directly to the domelight. I tried to touch 12v to it and when I did, I heard relays going off.....????? Has anyone hooked up the domelight supervision on an 02 F250 before?
Powermyster 
Silver - Posts: 962
Silver spacespace
Joined: April 06, 2005
Location: Ireland
Posted: April 27, 2005 at 3:55 AM / IP Logged  
What alarm is it. and you shold probabaly use a relay to turn it on rather than the alarm directly
What the output for the dome light supervision??
dare_ds69 
Silver - Posts: 419
Silver spacespace
Joined: January 25, 2005
Location: New Jersey, United States
Posted: April 27, 2005 at 5:47 PM / IP Logged  
Dome Supervision BLACK/ lt.blue  +  passenger kick panel
you must have to use a relay to do it.
how own your mind, control your life.
MECP certified. always use a DMM
Smoke Signals 
Member - Posts: 12
Member spacespace
Joined: March 29, 2005
Location: United States
Posted: April 27, 2005 at 8:08 PM / IP Logged  

You can also get to the BLACK/ lt. blue wire in the grey molex connector to the right of the steering column. That's where I connected mine (2000 F250) 

c0ckeyed00 
Copper - Posts: 61
Copper spacespace
Joined: October 14, 2003
Posted: April 27, 2005 at 8:33 PM / IP Logged  

I have a viper 791xv. when i was trying to do it i was testing with a 12v source. i followed the wire directly from the dome down to the kick panel, then when i cut it the domelight went off. so in my head i was set that this was the dome wire. then i tried to tap 12v to that wire so see the dome flicker but nothing...just relay clicking....i will try the ....."...BLACK/ lt. blue wire in the grey molex connector to the right of the steering column....".... tonite and see what happens. i will keep you informed.

thanks

hey Smoke Signals, when you hooked it up, did you just tap into it from a relay or did you diode it?

mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: April 27, 2005 at 8:42 PM / IP Logged  
Why did you cut the Dome Light wire??  U just need to splice in to it
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
c0ckeyed00 
Copper - Posts: 61
Copper spacespace
Joined: October 14, 2003
Posted: April 28, 2005 at 8:44 AM / IP Logged  
i wanted to ake sure that was the one.....i thought another wire was the dome because it acted like it....when the domelight went on, it would get 12v so i hooked it up to that and when i tried it, a little light on my door went on....
Smoke Signals 
Member - Posts: 12
Member spacespace
Joined: March 29, 2005
Location: United States
Posted: April 28, 2005 at 8:23 PM / IP Logged  

No need for diode.

Here's what you do: H1/4 (Blk/Wht) connects to terminal 85 on the relay. Tap the door trigger wire (blk/lt. blu) and connect to terminal 30 on the relay. Terminals 86 and 87 on the relay both connect to 12v constant.

Hope this helps.

nava94 
Silver - Posts: 296
Silver spacespace
Joined: February 28, 2004
Location: United States
Posted: April 28, 2005 at 10:58 PM / IP Logged  
bad way of testing for a wire.so far you been lucky so buy a digital meter before you fry something.
c0ckeyed00 
Copper - Posts: 61
Copper spacespace
Joined: October 14, 2003
Posted: May 05, 2005 at 12:30 AM / IP Logged  
I finally got back in town and wire the domelight. I found the wire in the driver kick. thanks a lot for everyones help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer