the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper Alarm On/Off Parking Lights


Post ReplyPost New Topic
< Prev Topic Next Topic >
snyblu5 
Member - Posts: 4
Member spacespace
Joined: May 01, 2005
Location: United States
Posted: May 01, 2005 at 10:35 PM / IP Logged  
i recently replace my parking bulbs on my 95 chevy tahoe, when i did this my blinkers were rapidly flashing as if i had a bad bulb,? all were working but i went ahead and replaced one random one from each side and it blinked properly. but my lights still dont flash when i set my alarm on and off? its always worked even when i first replaced the bulbs last week..just until today when i tried my blinkers and set my alarm did i notice they werent flashing? any info would be appreciated.... also ive had the alarm with remote start for 2 years with no problems its a viper alarm. not sure what model? thanx!!!!!!!!1
snyblu5
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 01, 2005 at 10:58 PM / IP Logged  
Check to see that the fuse didn't burnout on the Viper parking light wire.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
snyblu5 
Member - Posts: 4
Member spacespace
Joined: May 01, 2005
Location: United States
Posted: May 01, 2005 at 11:01 PM / IP Logged  
where would that be? ive checked the fuses on my truck all is good? thanks!!!
snyblu5
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 01, 2005 at 11:16 PM / IP Logged  
It will be off the Viper system ( I think WHITE wire ) near the driver's side of the dash. Look for a 10 amp ( maybe 15 ) inline and you might have to cut through some electrical tape to find it if the installer wrapped the fuse.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
snyblu5 
Member - Posts: 4
Member spacespace
Joined: May 01, 2005
Location: United States
Posted: May 01, 2005 at 11:56 PM / IP Logged  
i looked under the driver dash and found 3 different fuses two 30 amp and one 3 amp they were fine, but the wires were red not white? also when i unlock the truck the dome lights inside light up good sign i guess? i just want the security of being able to see my truck arm/disarm with the parking lights... im so stummped????????
snyblu5
Captanham 
Silver - Posts: 365
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 18, 2004
Location: United States
Posted: May 02, 2005 at 3:14 AM / IP Logged  
the 30 amps are for the main auto start, not sure about the 3, probably for a relay or something,, but the wire your looking for is white, and it will have a 10 amp fuse in it,, look for a wire goign off towards your light switch or maybe off to the left of the dash to a big wire group, trace it back from the main unit, (if it's a viper, check the back of the unit to make sure the color is white, it almost always is, but it maybe brown or something.. the back of the brain box has a list of all the colors and pins)
Bad Boys Customs
    audio - video - security
If you use it. Suport it. Donate to the 12 volt!
snyblu5 
Member - Posts: 4
Member spacespace
Joined: May 01, 2005
Location: United States
Posted: May 02, 2005 at 8:46 PM / IP Logged  
finally i found the fuse it was a 10 amp, and it was tucked way in my dash connected to a white lead. and it was indeed blown. so its been replaced and im glad to say everything is in working order!!!! thanks again for all the help, much appreciated!!!!!!!!!
snyblu5
Captanham 
Silver - Posts: 365
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 18, 2004
Location: United States
Posted: May 02, 2005 at 11:40 PM / IP Logged  
no prob
Bad Boys Customs
    audio - video - security
If you use it. Suport it. Donate to the 12 volt!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 18, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer