Clifford BB/Siren to DEI Alarm?

Home / the12volt's Install Bay / Car Security and Convenience / Clifford BB/Siren to DEI Alarm? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kwando

Member - Posts: 4

Joined: May 28, 2005

Location: United States

Posted: May 28, 2005 at 3:21 PM / IP Logged

I've done a search but i was unable to find anthing. Here is what i am trying to do.

I have a DEI Python 880XP alarm with windows module, prixomity sensor, and DEI's BB/Siren 515R. Well the 515R is placed in a location where it gets wet and shorts out and the siren goes off. I don't have any other location to put the siren.

I have a extra clifford siren that has a key on it. I am assuming it acts as a regular siren and a BB. It has 4 wires: red, blk, yellow, white with brown.

How do i hook up the clifford alarm to my DEI system? if i remember correctly i thought that the clifford system had a (-) negative trigger and the DEI's 515R has a (+) positive trigger.

Any help is appreciated.

Thx

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: May 28, 2005 at 6:18 PM / IP Logged

the siren that shorts out is it pointing in the down posistion. waht kind of car is it. i never had any problem of finding a spot of a siren. i did on afew cars had to remove iteams to put in certin places.

is the siren still good or shorted out all the way. or do you want both sirens hook up togeher

kwando

Member - Posts: 4

Joined: May 28, 2005

Location: United States

Posted: May 29, 2005 at 1:36 PM / IP Logged

swamprat323 wrote:

is the siren still good or shorted out all the way. or do you want both sirens hook up togeher

The car is a 2001 Honda S2000. I have the siren pointed down. The main problem is i lost the rubber cap and water gets in where the key is. Where can i get a new cap? Or wire up that other siren.

The clifford siren looks more heftier than the DEI one..

Here are a few pics... the siren is located on the passenger side right in front of the shock tower.

kwando

Member - Posts: 4

Joined: May 28, 2005

Location: United States

Posted: May 29, 2005 at 1:38 PM / IP Logged

some how the pics aren't working...

http://photos.imageevent.com/kwando/zexnitrous/websize/P4162884

http://photos.imageevent.com/kwando/mys2000/websize/P1272501

kwando

Member - Posts: 4

Joined: May 28, 2005

Location: United States

Posted: June 01, 2005 at 10:57 PM / IP Logged

Anyone else?

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: June 02, 2005 at 2:34 PM / IP Logged

i forgot i even posted in this post. im not sure on the wiring the sirens but maybe you can use some sort sealent to cover up were water gets into it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford BB/Siren to DEI Alarm?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.