Percision 200

Home / the12volt's Install Bay / Car Security and Convenience / Percision 200 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 01, 2005 at 4:13 PM / IP Logged

Got some scytek percision 200's in today. pretty cool system. spec wise. problem i have is on the back wiring diagram it gives the usuall blue and green locking wires as 500mA - outputs..

in the manual it says

Green: (-) 500mA lock output and (-)250mA unlock

Blue: (-) 500mA unlock output and (+) 250mA lock

do i have to diode isolate the Blue to only allow (-) or are they both negative or what way d they work

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 02, 2005 at 4:01 AM / IP Logged

anybody got any input on this for me. somebody said to just ignore it would that be right. Just treat them as both Negatives forget about the positive

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Percision 200

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.