Plymouth Door locks

Home / the12volt's Install Bay / Car Security and Convenience / Plymouth Door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

eagle_51

Member - Posts: 4

Joined: May 25, 2005

Location: United States

Posted: June 01, 2005 at 4:34 PM / IP Logged

Was wondering if anyone could help me out. Close to blowing the darn thing up! I have a 98 Plymouth Voyager. Trying to connect a Bulldog Model Deluxe 500. Most of the connections were gravy, not the power door locks. Bull says that the ply is a one wire neg sys. I found the wht/grn wire that controls the locks. If I connect a 1.5 k resistor to a jumper from lock wire to short it locks and a 250 resistor it unlocks fine. Problem is that I can't seem to figure out how to cofigure the outputs from the module. I tried one at a time. Grn/wht wire from module to 1.5 resistor to lock wire. Will not lock. Tried with blu/wht on mod. to 250 resistor to lock wire will not unlock. Bull says to wire connector as a "type A pos". I also tried a relay with resistor, no help. The unit cliks with button pushed. Bull tech will not reply to e-mails. Can you guys help out?

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: June 01, 2005 at 4:45 PM / IP Logged

Wire them like so. I would prefer to use 2 relays myself.....

eagle_51

Member - Posts: 4

Joined: May 25, 2005

Location: United States

Posted: June 02, 2005 at 2:29 PM / IP Logged

I just wanted to say thanks for the response I received to my question. You guys answered very quick and accurate. I discovered that if I had looked a little harder, I would have found the answer on your site. Thanks again.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Plymouth Door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.