05 chrysler 300 keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / 05 chrysler 300 keyless entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

crumbag

Member - Posts: 4

Joined: June 17, 2005

Location: United States

Posted: June 17, 2005 at 11:08 AM / IP Logged

I have a 05 chrysler 300 that i am doing a keyless entry keypad on and my problem is that when you lock the car with the factory remote the factory security system disables the doorlock switches after a few minutes. Does anyone know any way that I can get around this.

thanks for any help

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: June 17, 2005 at 4:50 PM / IP Logged

If you UNLock car with key and open door, doesn't the door locks become operational again?

I think you can pulse a NEGATIVE to the Door Trigger & wake it up.....

Don't Learn from Others Mistakes

You Might Be the One That Knows.

crumbag

Member - Posts: 4

Joined: June 17, 2005

Location: United States

Posted: June 17, 2005 at 5:03 PM / IP Logged

well the guy aparently loses or locks his keys in the car a lot. If you're talking about pulsing the door lock trigger wire or the factory alarm un-lock trigger wire?

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: June 17, 2005 at 10:40 PM / IP Logged

U should be able to send a pulse from your keypad to wake up system at the same time as U UNLock the doors..........

Don't Learn from Others Mistakes

You Might Be the One That Knows.

crumbag

Member - Posts: 4

Joined: June 17, 2005

Location: United States

Posted: June 19, 2005 at 9:35 PM / IP Logged

would you happen to know which wire(s) i need to pulse and what resistor (if any) i need....

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: June 20, 2005 at 6:52 AM / IP Logged

if you sent a pulse to the door trigger you will trigger the factory alarm, you have to use relay and resistance

Power Lock	PURPLE / dk. green	-	DKP or cluster, gry 26P plug, pin 5
Notes: Lock is negative trigger thru a 330 ohm resistor. Unlock is negative trigger thru a 100 ohm resistor. MUST use relays.
Power Unlock	same as power lock wire

or try to get the 456l this is a learnig module resistor, that way you don't have to use realays.

how own your mind, control your life.

MECP certified. always use a DMM

crumbag

Member - Posts: 4

Joined: June 17, 2005

Location: United States

Posted: June 20, 2005 at 11:26 AM / IP Logged

This is how i already have it wired. the problem is that the factory security system won't accept any input from that wire if the car was locked with the remote setting the alarm....

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

05 chrysler 300 keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.