shaved door handle / solenoid / alarm ?

This is my first post. I searched the forum post and couldn't find an answer.......I am currently trying to hook up 2 door solenoids in my 1994 mitsubishi 3000gt.... I have a Python 460hp model alarm and I am stumped on how too hook the solenoids into the alarm so that the drivers door works off the unlock button and the passenger side works off the aux button. Any help pointing me in the right direction would be greatly appreciated. Thanks.

Hook the unlock output(should be blue in a 3 pin plug) to the driver's door soleniod through a relay and hook the RED / white wire in the primary harness up to the passenger's solenoid through a relay. You could also use the WHITE/ blue and program it to be a second unlock output and just hit unlock 2 times to pop the second door.Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Thanks. Just one more question.....does this look like the realy is hooked up correctly?     30 & 85 are hooked up to power in 86 ground 87 alarm [blue wire] 87a solenoid thanks in advance.