'91 mustang GT

Home / the12volt's Install Bay / Car Security and Convenience / '91 mustang GT (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

joelab

Member - Posts: 7

Joined: October 23, 2005

Location: Canada

Posted: October 23, 2005 at 12:55 AM / IP Logged

Hey i have a 1991 Ford Mustang GT and the previous owner ripped out the alarm before selling me the car. The power door locks now no longer work and i'd like to get it hooked up to the alarm I have now. Any ideas as to where the would have been spliced for the alarm so I can hook them up again?

Thanx Alot

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1990-91&make=Ford&model=Mustang&ID=17828&type=Alarm

redpeppers

Silver - Posts: 483

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2005

Location: United States

Posted: October 23, 2005 at 1:02 AM / IP Logged

sounds like they cut the lock and unlock wires and didnt wire them back up....what i would do is try to wire the factory stuff back up and see if it works then go from there...the wire colors r as goes

pink / YELLOW ...lock

pink/green...unlock

they r 5 wire door locks when adding aftermarket system to the mustang. let me know if u need help with that.....

Where theres is a wire there's a way.

joelab

Member - Posts: 7

Joined: October 23, 2005

Location: Canada

Posted: October 23, 2005 at 1:04 AM / IP Logged

perfect i'll check that out in the morning

thanx alot!!

redpeppers

Silver - Posts: 483

Joined: May 24, 2005

Location: United States

Posted: October 23, 2005 at 1:07 AM / IP Logged

np oh ya i forgot to tell u those wires r in the drivers kick panel.........

Where theres is a wire there's a way.

joelab

Member - Posts: 7

Joined: October 23, 2005

Location: Canada

Posted: October 23, 2005 at 1:15 PM / IP Logged

ok heres the deal, i found the pink / YELLOW and pink/green in electrical tape... connected to nothing, i spent almost 2 hours trying to find the other end but no luck. what i did find was a: red wire, red w/ black stripe, blue, blue w/white, blue w/black (5 wires? none of them connected, just electrical tape on the ends). the red wires go up to the siren under my hood, and it appears the others are spliced into the giant mess of wires under the kick plate. its a compustar 2wama-a that i have installed right now (cm3300 module). By any chance are those all the wires i need to hook up the locks to my alarm? and if so how? any help would be greatly appreciated. thanx

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 24, 2005 at 9:12 AM / IP Logged

Do you know what system he had in there from before ? Also, what are the wire colors that are attached to the ends of the PINK / YELLOW & PINK/GREEN wires ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

joelab

Member - Posts: 7

Joined: October 23, 2005

Location: Canada

Posted: October 24, 2005 at 12:32 PM / IP Logged

Im not sure what system he had in there before. and the pink / YELLOW and pink/green wires are just wrapped in electrical tape all the way up under the dash, im prety sure it leads to the switch.. not positive tho. the b red wires that are going to the siren i assume were put there when i got the alarm installed.. i asked for them to hook up the power door locks for me but they coulnt find where the old alarm was spliced. now that ive found the pink / YELLOW and pinmk/green i thouhgt maybe i could hook it up.

joelab

Member - Posts: 7

Joined: October 23, 2005

Location: Canada

Posted: October 25, 2005 at 10:28 PM / IP Logged

any ideas?

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 25, 2005 at 11:13 PM / IP Logged

Best thing to do is Hook ALL Factory wires back together. Make sure EVERYTHING works and then Install your Compustar.............Who knows ...the location of where the mess is may not be the place you want to install your unit

Don't Learn from Others Mistakes

You Might Be the One That Knows.

joelab

Member - Posts: 7

Joined: October 23, 2005

Location: Canada

Posted: October 25, 2005 at 11:19 PM / IP Logged

well the unit is already installed. its all working fine, just dont have the power door locks hooked up, and it looks like the place where i got it installed already ran the wires for the keyless, they just told me they couldnt find where the old alarm was spliced for the door locks so they couldnt hook it up, but i found those wires

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.