05 Equinox

Home / the12volt's Install Bay / Car Security and Convenience / 05 Equinox (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Lmsc

Member - Posts: 13

Joined: January 17, 2004

Location: Canada

Posted: November 11, 2005 at 7:51 PM / IP Logged

I installed a remote starter in this truck last weekend and the Passlock & wrench lights come on when started by remote. I have the keysense wire (-) hooked up and I have the passlock bypassed. The lights only come on when remotely started, works great if you cancel the remote and then start it with the key.

lmsc

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: November 11, 2005 at 7:59 PM / IP Logged

Make sure you are powering both accessory wires as accessories and not ignitions. I did a Monte Carlo once with one of those two powered as ignition, and the passlock kind of went bonkers.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 11, 2005 at 9:05 PM / IP Logged

What bypass did you use ? Some of the modules that use a set resistor value are not as good as some of the self learning modules.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: November 11, 2005 at 10:56 PM / IP Logged

I like using the PLXR with that vehicle as it has the keysense output on it.

make sure you've diode isolated your keysense from your bypass (ground when running)

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Lmsc

Member - Posts: 13

Joined: January 17, 2004

Location: Canada

Posted: November 12, 2005 at 10:29 AM / IP Logged

Thanks guys for the info. I bought a new bypass and it works fine.

lmsc

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

05 Equinox

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.