command start 290l/250in problems

Home / the12volt's Install Bay / Car Security and Convenience / command start 290l/250in problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

andyournameis

Member - Posts: 4

Joined: November 06, 2005

Location: Canada

Posted: November 12, 2005 at 5:08 PM / IP Logged

i just bought a 2000 chev venture with a command start with the # 290l/250in on the main unit. The problem is that when you press the button on the remote, the remote makes a noise tha van doesn't blink (lights) or start. All the fuses are good and the hood switch semms to bee alright. I don't have a manual for it. Can it be taht it needs to be reprogammed or? Wher can i get a manual?wiring diagram for this? Are these any good? Thanx for the help

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 12, 2005 at 9:07 PM / IP Logged

command start remotes don't come programmed to the alarm brain that has to be down by whoever is installing it, I don't have a manual, I will be able to get to one on tuesday if no one else has replied

andyournameis

Member - Posts: 4

Joined: November 06, 2005

Location: Canada

Posted: November 13, 2005 at 11:36 PM / IP Logged

k .thanx. anything will be a help

andyournameis

Member - Posts: 4

Joined: November 06, 2005

Location: Canada

Posted: November 19, 2005 at 12:32 AM / IP Logged

Please I need some help here. Thanx

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 19, 2005 at 1:01 PM / IP Logged

Do a search on these forums for " Command Start " and you will find what your looking for. This topic has been brought up many times, so I'm sure you'll be able to find the remote transmitter programming sequence in the posts as well as wiring diagrams.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

command start 290l/250in problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.