2000 jgc jdl-pk, rs-900 vii

Hello I recently purchased a RS-900 VII remote starter and a JDL-PK for installation into a 2000Jeep Grand Cherokee Laredo.  I have a few questions about the install.

1) Does Pin #3 of the RS-900 run to the brown wire on the JDL-PK?2) Does Pin #4 need to be installed if no trunk pop or Dome Light Illumination is requested?3) What does Pin #5 (Green) get wired to?4) Pins #9 & 10. Do these get wired to the vehicles harness or the JDL-PK?5) On the High-Current connector is it necessary to hook up the parking light output? And am I correct in saying the Pink/White wire is not necessary for my install?As for the JDL-PK:1) Brown wire gets wired to Pin #3 on the remote starter?2) Do the Green, Blue and Violet/White wires get wired to the door module in the drivers door?Any help is appreciated with my install. Thanks for your help!

Rick

rickemborsky@gmail.com