Posted: January 12, 2006 at 1:58 AM / IP Logged
Posted: January 12, 2006 at 2:22 AM / IP Logged
Posted: January 12, 2006 at 9:43 AM / IP Logged
Posted: January 12, 2006 at 11:58 AM / IP Logged
Posted: January 12, 2006 at 10:47 PM / IP Logged
Posted: January 13, 2006 at 1:19 AM / IP Logged
Posted: January 13, 2006 at 1:25 AM / IP Logged
Posted: January 13, 2006 at 1:31 AM / IP Logged
Posted: January 13, 2006 at 1:34 AM / IP Logged
Posted: January 13, 2006 at 2:30 AM / IP Logged
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Sunday, December 14, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Sunday, December 14, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.






. i only cut one wire and that was the starter wire for the kill part of the system. 05gt i tested Both wires and they both turned 12v (acutally 11.4) after i turned on the switch. they were both 0 before oh by the way i am using my red tester for the wire and black to body ground. if thats any help. does any body know which one i really dont want electral tape on my wires for no reason.
