1996 Chrysler Town & Country lock/unlock

Home / the12volt's Install Bay / Car Security and Convenience / 1996 Chrysler Town & Country lock/unlock (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mr bumbles

Member - Posts: 1

Joined: January 17, 2006

Location: United States

Posted: January 17, 2006 at 10:04 PM / IP Logged

I know that the lock/unlock wire is a GREEN / WHITE located under the BCM but where?. I cannot find it.

Mr Bumbles

redpeppers

Silver - Posts: 483

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2005

Location: United States

Posted: January 17, 2006 at 10:31 PM / IP Logged

my info says WHITE/ green located at the bottom of the fuse box (1 of 3 wires) - Use relays and set up for negative trigger. Place a 4020 ohm resistor inline on the lock output, and a 665 ohm resistor inline on the unlock output. If you don*t have a factory security system use a 1500 ohm for lock and a 250 ohm for unlock.

Where theres is a wire there's a way.

jacqueslacombe

Copper - Posts: 124

Joined: December 04, 2005

Location: Canada

Posted: January 18, 2006 at 2:07 AM / IP Logged

HI There is 2 connectors under the fuse box those connectors goes to the BCM module the right one is easy to removed the second one ise harder the one you need to removed is the second one this is the one to the left side there is 2 wire you can use the WHITE/ grenn or the WHITE/ lightgreen those two are close togeter GOOD LOCK

cocolaboy

Search for other posts by jacqueslacombe

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1996 Chrysler Town & Country lock/unlock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.