i need help bad with tach wire for 99' f150

Home / the12volt's Install Bay / Car Security and Convenience / i need help bad with tach wire for 99' f150 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

supertremor

Member - Posts: 6

Joined: December 26, 2002

Location: Jamaica

Posted: December 27, 2002 at 7:40 AM / IP Logged

i can't find the tach wire on my truck it is a 99' xlt v8 or if i can get a complete diagram for aps9995 prestige alarm for my truck thx

supertremor

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: December 27, 2002 at 8:50 AM / IP Logged

Tach wire : on the 4.2L it is a dk.blue/lt.green at the coil pack on top of the motor. Tach wire : on the 4.6L it is a pink/white in a 3 pin plug at the front of the motor below the air intake and next to the fan. Tach wire : on the 5.4L it is a lt.GREEN / WHITE at the coil on the passenger side of the motor between the fuel injectors.

J Rilla

Owner/Installer

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 27, 2002 at 8:54 AM / IP Logged

Use one of the injector wires for this truck if you can't find the tach wire. Use any of the uncommon colored wires as your tach signal. Here is the installation diagram for the APS 995 ( I think you typed in the wrong number above ):

http://www.audiovox.com/manuals/installationmanuals/1286166_IM.pdf

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

supertremor

Member - Posts: 6

Joined: December 26, 2002

Location: Jamaica

Posted: December 27, 2002 at 11:14 AM / IP Logged

ok i found the pink and white wire i connected it but i can not get the alarm to learn the aps 995 prestige alarm manual said the i should turn the ign on then press then i should press the program button 3 times then turn off ign then hold down button and start then it start blinking then park lights that it did but and then after it was surposed to blink 3 time to let me know that it is out of learning mode that it did not

supertremor

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 27, 2002 at 3:07 PM / IP Logged

Make sure that you re doing all the steps one after another. SOme systems give you s time frame to complete the programming and if it takes longer than the allowed time, it defaults automatically into normal mode.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

i need help bad with tach wire for 99' f150

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.