the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Program a remote for 791xv


Post ReplyPost New Topic
< Prev Topic Next Topic >
stonecole 
Copper - Posts: 50
Copper spacespace
Joined: October 30, 2005
Location: United States
Posted: February 08, 2006 at 12:59 AM / IP Logged  

Do anyone have info on programming another remote for the viper 791xv. Just bought a used remote need to find out how to program it. I have the original remote, needed a second remote.

Any help is appreciated. Thanks in advance.

turbo6 
Member - Posts: 4
Member spacespace
Joined: February 08, 2006
Location: United States
Posted: February 08, 2006 at 3:11 AM / IP Logged  

Open the door

turn the ignition on to the on position

press the valet/programming button 2 time and hold it on the 2nd push

you will hear a long confirmation chirp

press the arm button on the new 2-way and you will hear one chip

you will hear a confirmation chirp when the remote button is pressed

turn the ignition off

done

stonecole 
Copper - Posts: 50
Copper spacespace
Joined: October 30, 2005
Location: United States
Posted: February 08, 2006 at 10:34 AM / IP Logged  

Thanks turbo6, I'll give that a try.

wranglercory 
Copper - Posts: 53
Copper spacespace
Joined: January 27, 2005
Location: United States
Posted: February 08, 2006 at 10:52 AM / IP Logged  
let us know if you still are having problems programing those remotes are well known to have cold solder joints on the circuit boards
stonecole 
Copper - Posts: 50
Copper spacespace
Joined: October 30, 2005
Location: United States
Posted: February 08, 2006 at 10:57 AM / IP Logged  

I never tried programming yet. This will be my first time programming this remote. But you said these remotes are known for having cold solder joints?

P.S. my remote should come in a day or two, bought it on ebay. If it don't program, I'll let you know.

Thanks for the heads-up.

stonecole 
Copper - Posts: 50
Copper spacespace
Joined: October 30, 2005
Location: United States
Posted: February 11, 2006 at 2:34 PM / IP Logged  

Received my remote today and programmed it as described above by turbo6. Excellent! works like a charm.

Thanks for the replies.

P.S. No problems as of yet Wranglercory.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer