the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 chevy suburban, remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
jmacf14 
Copper - Posts: 160
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 27, 2005
Location: United States
Posted: February 24, 2006 at 11:20 PM / IP Logged  
Hi guys, the info I have for this rig says that the (+) park light wire is brown and located in the harness in the drivers kick panel. problem is there are two brown wires there in two differant harnesses. does any one have any more info on this? or at least a good test procedure with my dmm?thanks for the help.
jmacf14
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: February 25, 2006 at 5:49 AM / IP Logged  
I tried to help another installer find positive parking lights in one of those, and as I recall, we had a hard time and eventually gave up.
I would imagine you should be able to find the wire at the back of the radio, though.
What are you installing? Any reason you can't use the negative parking light wire? Because that's easy to find-----gray/black at the BCM below the steering column.
mad550 
Copper - Posts: 201
Copper spacespace
Joined: February 23, 2006
Location: Australia
Posted: February 25, 2006 at 6:25 AM / IP Logged  
Two wires one is illumination off the dimmer the other should link directly to the park lights
WOW Sight and Sound
Maroochydore
Nothing is impossible!
Do it right the first time or don't do it at all.
jmacf14 
Copper - Posts: 160
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 27, 2005
Location: United States
Posted: February 25, 2006 at 11:32 AM / IP Logged  
Hi Chris, thanks for the reply. I am using an ultra start unit, and after reading your post, I double checked the features, and I can program the alarm for neg. park lights.(it is set up for pos. from factory. Thanks for the suggestion.
jmacf14
tragik 
Copper - Posts: 169
Copper spacespace
Joined: September 28, 2005
Location: Alaska, United States
Posted: February 25, 2006 at 12:30 PM / IP Logged  
You can find the parking lights, brakes, and a buch of other useful wires in the junction box to the left of the brake. The PL and brakes go to a plug that the trailer harness would plug into if equiped. I have seen installers put small female disconnects on the pins coming out of the box, but I usually just pull the box , flip it around, and tag the wires on the back side. PL is brown, brakes are light blue. Both are going to the same plug, on the top side of the box.
Northstart.....or start it your damn self.
jmacf14 
Copper - Posts: 160
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 27, 2005
Location: United States
Posted: February 25, 2006 at 4:46 PM / IP Logged  
Hi guys, I just succesfully installed my ultrastart r/s alarm in my 2003 suburban, with a gmdlbp module. everything works great except when the alarm is triggered by opening the door, both oem and ultrastart alarms go off, and I can only shut off the ultrastart with remote. then I have to use oem remote to shut off oem alarm. I dont want to have to carry both remotes for this. how can I shut off with aftermarket remote?
jmacf14
jmacf14 
Copper - Posts: 160
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 27, 2005
Location: United States
Posted: February 25, 2006 at 4:48 PM / IP Logged  
good to know. I know exactly the box that you are talking about!
jmacf14
jmacf14 
Copper - Posts: 160
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 27, 2005
Location: United States
Posted: February 25, 2006 at 4:54 PM / IP Logged  

 I just succesfully installed an ultrastart r/s unit in my 2003 suburban, with a gmdlbp. any one have any info on how to get the aftermarket unit to shut off the oem alarm when it is triggered? it only happens when the door is opened while armed. I cant get my aftermarket remote to shut off the oem alarm.any ideas?

jmacf14
jmacf14 
Copper - Posts: 160
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 27, 2005
Location: United States
Posted: February 25, 2006 at 7:20 PM / IP Logged  
ok, now i also have one other issue. when I arm the alarm, and the domelights finally go off it sets off the alarm.any way to fix this problem?any help would be apreciated. thanks
jmacf14

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer