Intelliguard 750

Home / the12volt's Install Bay / Car Security and Convenience / Intelliguard 750 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: March 04, 2006 at 5:34 AM / IP Logged

about to start this install in about an hour just one thing

there is a break light input and output

input says to put to +12v constant and output to brake

but i thought both would go to brake because the blackjax needs a signal from the brake(input) and flashes the brakes(output)

or does it monitor the brakes on the output wire

Why oh Why didn't i take the blue pill

Darren Power

mad550

Copper - Posts: 201

Joined: February 23, 2006

Location: Australia

Posted: March 04, 2006 at 5:38 AM / IP Logged

Hook them both up just use a diode so the input wire doesn't sense the output wire

WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Intelliguard 750

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.