cruise failure after 2w900fm-s

Thank you guys, with the help of this forum I was able to install my own starter, having fun while doing it but now I'm having a problem with the cruise control not working. like this topic https://www.the12volt.com/installbay/forum_posts.asp?tid=69379&KW=cruise+not+working I'm having the same problem... checked everything, disconnected the wire from the brake switch (to starter module) and still no success.. Anybody has any suggestions? Thank you

Oops... don't know how to edit my own post but I forgot to mention the make of my truck: 2001 Silverado (everything electric)

Check Cruise Control Fuse @ Driver side Fuse BoxBe sure your Brake Lights work.......Make sure you did not unplug the 4 Prong Plug on side of Steering Column.....If you Unpluged Ignition 52 PIN Plug under Steering Column, check to be sure it is tight & NO PINS bent.......Check your White Wire on Brake Switch, should show Ground when Pedal Up, 12Volts + when Pedal pushed.......Check Orange wire on Brake Switch, should show 12 Volts + Constant.......Also Check Plug on Driver Firewall under hood. MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

After "dropping" the whole thing for a while as it drove me crazy I got back to it.... checked every single plug and wires and what do you know it all started working :) Funny I had checked the plugs and wires before without luck.. anyway thanks it is working now.