Clifford channel output

Home / the12volt's Install Bay / Car Security and Convenience / Clifford channel output (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dakotadan23

Member - Posts: 9

Joined: September 13, 2005

Location: Florida, United States

Posted: April 26, 2006 at 11:04 AM / IP Logged

I've got a Clifford Matrix 3 3-channel alarm with 4-button remote. The only additional feature besides the lights flashing that I'm using is the remote door lock/unlock. What output wire do I need to use to activate the solenoid for my shaved doors? I need an output with a switched ground. I've got approximately 6 free wires that I can use: a RED / white, BLACK/ white, purple, and blue wire from the 12-pin plug, and a RED / white and BLACK/ white wire from the 8-pin plug. Like I said, I need to know which of these wires will provide a ground when the button on my remote is pushed. Also, which channel should I be looking for?

Dan

1948 Chevrolet Fleetline - rat rod

1998 Dodge Dakota full custom

2007 Chevrolet Silverado 2500HD - wife's daily

2008 Dodge Caliber SXT - 'cause 30mpg don't suck!

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: April 26, 2006 at 2:56 PM / IP Logged

ch 2 is RED / white on 12 pin harness the RED / white in the 8 pin is used with this wire, it control the input ot the on board relay.

ch 3 is the WHITE/ blue on the 12 pin harness this wire will control a relay.

the others wires u list are for hood and door triggers etc etc.

i upload the clifford matrix 3 install guide, its in the downlaod section

dakotadan23

Member - Posts: 9

Joined: September 13, 2005

Location: Florida, United States

Posted: April 26, 2006 at 4:12 PM / IP Logged

Thanks for the help. I'll see if I can't get it to work when I get home tonight.

Dan

1948 Chevrolet Fleetline - rat rod

1998 Dodge Dakota full custom

2007 Chevrolet Silverado 2500HD - wife's daily

2008 Dodge Caliber SXT - 'cause 30mpg don't suck!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford channel output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.